Archives

Plywood Carrier You don't have to be built like an orangutan to carry plywood! This simple carrier extends your reach and turns an awkward job into an easy one. It's quick to build out of [...]

If you have a shop, you need some type of vacuum or a dust collector. No, a dust collector is not simply attached to a table saw, band saw or router table. It is as perfect to clean up wood …

Chad’s Sawhorse Workbench Stacking sawhorses serve a dual purpose. By Chad Stanton I usually need a pair of sawhorses when I’m working outside the shop, but sometimes I also need a [...]

Thickness Gauge I use this handy device constantly to check and compare thickness on a variety of projects. Slide the gauge over the edge of the stock, keeping the graduated edge flat on the [...]

Router Dado Jig In the course of my work as a contractor, I often need to build cabinets and bookshelves on site – without the luxury of shop tools. I gave up on the flimsy router fence [...]

Machine Floor Locks Anyone with a machine on wheels – especially a tablesaw or planer – understands the necessity of locking it in place before using it. I use a pair of toggle clamps [...]

Smooth-Cutting Hole Saw I cut a lot of discs and large-diameter holes in my shop. I was puzzled for the longest time because I was getting vibration and smoke. It even happened with new hole [...]

Dovetail Marking Jig This little jig greatly speeds the laying out and marking of dovetail pins. Make the jig so the thin piece is exactly the same size as the pin you plan to use. Then, mark a [...]

Chad’s Stepbox Learn how to make compound-angle dovetails building this handy stool and portable tool box. Chad Stanton For my job as a trim carpenter and furnituremaker, I’ve always needed [...]

Easier Resawing I'm stuck with a wimpy 1/2 hp bandsaw that stalled whenever I tried to resaw anything tall. Then my neighbor turned me on to a technique that solved my problem. I pre-cut a [...]

Bevel Gauge For years I ground a way-too-shallow edge on my favorite chisel. It wouldn't hold up worth beans, so I dug through the junk drawer for something I could make a bevel gauge out of. [...]

Rubber Band Veneer Clamp I had tried everything to successfully glue veneer on curved surfaces: cauls, three-way clamps, string and tape, you name it. Nothing ever worked as well as this homespun [...]