Archives

I use a sled for cross cutting 3/4-in. melamine and plywood panels up to 24 inches wide. These panels can be hard to hold in position while making a cut, so I installed a cam lever that securely [...]

Tool: VRS-200 Vertical Router Sled Shop Now Manufacturer: Infinity Tools MSRP: $319 Infinity Tools, out of Florida, has been known to design and manufacture some of the highest quality tools [...]

Let’s face it: running a twisted board through the planer doesn’t make it flat. The board will still be twisted when it comes out. The trick is to use a sled that prevents the board from rocking [...]

This sled allows me to cut the 1/8-in.- wide strips of veneer that I often use for inlays. I can cut strips all day without having to measure or reposition the saw’s fence. The sled consists of a [...]

Make your ‘MegaSled’ into a shop workhorse.  Previously, we built the MegaSled – a table saw sled designed to accommodate a series of joinery jigs. The jigs and attachments I cover in this [...]

Make accurate and safe crosscuts with ease – and set the stage for clever accessories Most power-tool woodworkers have at least one table saw sled. And while a sled can make your work safer and [...]

Whenever I make a right angle cut on my tablesaw, I use a sled. If I’m cutting large panels, I use a big crosscut sled. I pull out a smaller sled for rails and legs. To cut tenons with a …