It seems like I’m always misplacing my push sticks, blade wrench, featherboards and other small tablesaw accessories. To solve my problem I added a [...]
Here’s my solution for storing skinny things like wood trim and edge banding. I bought a 12-in.-dia. by 8-ft.-long cardboard concrete form at a home center for [...]
Fifty bucks and a few hours is all it takes to put together this finishing booth. It keeps overspray off my tools and dust off my projects. Since I use waterborne [...]
Universal Clamp Rack I’ve tried several designs for clamp racks but this one’s the best because it holds lots of different types of clamps. It’s also very simple to build. I [...]
Light-Duty Folding Worktable By Kevin Boudreau Sometimes a guy just needs some space on which to spread out. That’s why I built this folding worktable for my compact workshop. [...]
I came up with this slick way to drill a large, straight hole in the end of a post. It works great and makes good use of my tall floor-mounted drill press. To [...]
I recently built a project that required a tall vertical fence for my tablesaw. My tablesaw fence lacks a T-slot and I didn’t want to drill holes through [...]
Stunning grain. Huge boards. Highly rot resistant. A dream (or a nightmare) to work. What one wood fits this bill? Mahogany, of course. by Tom Caspar [...]
I found a new place to store dispensers right under my nose. Any lightweight stuff that comes in a box can be fastened to the bottom of a cupboard and still leave [...]
To change the blade on my tablesaw, I used to wedge the front end of my push stick between the saw table and the blade teeth, so I could loosen or re-tighten the arbor [...]
