Bevel-out or Bevel-in? Good Question

If you haven’t surmised it yet, one of the themes running through the Spring 2008 issue is the fact that accurate sawing has a lot more to do with accurate chisel work than anything else. [...]

What to do With an Antique Bench

Reader Michael Holcomb writes: I’m writing to ask your advice about an old Pennsylvania cabinet maker’s workbench I was lucky enough to buy a couple of years ago. It came from the [...]

Do L-Brackets and a Leg Vise Mix?

Mark L. Wells writes: I’ve read your book and the extra chapterr.  Both are great. You provide so much more detail than anything else I’ve read, and I almost feel guilty for not [...]

Pumpkin Pine, Like Ted Turner Would Love

Reader Greg Peel writes: I’m glad to see that the latest issue of Woodworking Magazine is a great one like the others. I was wondering if there is color picture of the pumpkin pine samples [...]

Questions on Glue, Nails and Drawbores

Adrian Mariano writes: I just watched your DVD (“Forgotten Hand Tools” from Lie-Nielsen Toolworks) in which you advocate the use of nails and drawbores to overcome the flaws in the [...]

How Do I Sharpen a Rasp?

John Griffin-Wiesner writes: Thanks to your blog posting last week which alerted me to the closing of Auriou, I purchased my only three Auriou rasps. While explaining them to a non-woodworker [...]

Some Details of the Parallel Guide

Question: I’m watching your commentary on this one quite carefully: I’m planning to build a bench this year or next and have wondered about torsion boxes instead of slabs. Also, could [...]

Wedged Tenon v. Drawboring

Question: Looking over the current and past issues of Woodworking Magazine, I see how drawboring or wedging a mortise and tenon joint will improve the strength and fit of the joint.  But is [...]

About Holes and Cracks and Benches

Question: A couple of questions regards to my Roubo bench project: 1. Regarding laminating the top: I’m not the best laminator in the world. Ihave about a dozen small cracks on both [...]

Resharpening a Scraper Plane

Question: I’ve noted that you’ve recently mentioned that you’ve been looking into scrapers, so I thought that maybe you could answer a question that I have about scraper-plane [...]

page 1 of 4

Start typing and press Enter to search