Archives

Sometimes you need to clamp parts that are out of reach of the throat depth of standard clamps. Here’s a design for a long-reach clamp that can be made from 2×4 lumber, 3⁄4” plywood or [...]

While making a base for a wooden vase, I had to glue up a small octagonal shape. I made this simple band clamp from a piece of string and a rubber band. Here’s how it works: first, tie one end …

When working on small projects, I often need to glue odd-shaped mouldings and tiny trim to box sides and other pieces. Not much pressure is required to hold these small pieces in place, and I [...]

Clamping cauls are indispensable for gluing up casework. A caul is simply a stiff piece of wood used to apply pressure where a clamp can’t reach. Sooner or later, you’re going to run [...]

Like most woodworkers, I never have enough clamps. Adding to a clamp collection is expensive, so when I needed some deep reach clamps, I made these auxiliary hardwood jaws. The jaws are mortised [...]

I have a humble number of bar and pipe clamps and no time or desire right now to build a dedicated clamp rack for them. Instead, I installed a standard closet bracket on my shop wall for the [...]

Bessey K-Blocks are great for holding K-clamps in position for glue-ups, but they’re also quite handy for other things. I milled hardwood strips the same dimensions as my K-clamps and use [...]

I found yet another use for my trusty speed squares. Just clamp one or two of them inside the corners of a cabinet when you’re gluing it up. This guarantees that the corners will be square.  [...]

When gluing miters for small mouldings, clear packing tape makes an ideal clamp. Begin by placing a strip of tape across the bottom of the joint; this will prevent glue squeeze-out from getting [...]

Tool: Bench Cookie Shop Now  Manufacturer: Rockler MSRP: $12.99 (set of four) These aptly named bench cookies are clever and inexpensive problem solvers. A set of four elevates a board for [...]

I made a built-in bookcase for my daughter that required attaching the face frame after installing the case. I didn’t want to mar the face frame with nail holes, but I don’t have any [...]

For years, I sanded and hand planed panel edges by laying them flat on my workbench.  I could never quite squeeze a bench vise into my woodworking budget, so I came up with this fast, inexpensive [...]