Archives

For years, I sanded and hand planed panel edges by laying them flat on my workbench.  I could never quite squeeze a bench vise into my woodworking budget, so I came up with this fast, inexpensive [...]

Oxalic acid makes black marks disappear. Nasty stains can occur during glue-up if steel clamp beams are left in contact with wood dampened by glue squeeze-out or by scrubbing off the glue. [...]

Venetian blinds purchased from a home center come in a variety of standard sizes. They are cut to the correct width by the retailer, but to adjust the height you remove a number of the slats at [...]

I frequently need to clamp wood on edge to saw tenons or work the edge of a plank, but I don’t have a traditional woodworking bench. While studying at the Northwest School of Wooden Boatbuilding, [...]

After years of wishing my old workbench had a tail vise, I realized I could make one of my new Jorgensen Cabinet Master bar clamps do the job. All I had to do was reverse the sliding lower jaw [...]

I lost the rubber pads that came with my clamps. I liked the way the pads protected the wood, so I decided to make my own. After a couple dips in liquid plastic ($9 at a hardware store), my [...]

I recently made a couple of recipe boxes with finger joints. I didn’t have enough regular clamps to glue both boxes at once, so I decided to use band clamps. During my dry run, I discovered that [...]

Tool: Miter-Tight Picture Fram Clamp [Buy Now]  Manufacturer: Rockler MSRP: $99.99 If you’d like to make picture frames—particularly with pre-made moldings—be warned: Aligning those miters can [...]

I made a clamping device for my bench that can quickly snug up a board just by swinging a lever. The lever has a cam that pushes a sliding stop tight against the board. I made all the parts from [...]

Some objects aren’t easy to hold for drilling. When I run into a situation like this, I use a wooden-jawed handscrew that has sandpaper glued to one side of it, so it doesn’t move [...]

When your hands aren’t strong or large enough to put the last squeeze on a big clamp, try clamping the clamp. My ingenious wife, who has very small hands, invented this solution. She works [...]

Tool: Pipe Vise Manufacturer: Lee Valley Price: $65 A tail vise is an essential part of a first-class workbench. It’s used to hold work on top of the bench, between dogs. Most types of tail [...]