Archives

I do almost no power sanding. But I do use abrasives in my work. And the only abrasive I use is Abranet. I hesitate to call it “sandpaper” because it is absolutely nothing like sandpaper. There’s [...]

Every year I recommend one tool that is a bit spendier than the rest, and this year it is the Lie-Nielsen Honing Guide. Thomas Lie-Nielsen first showed me the prototypes about eight years ago, [...]

During the last few years as I have turned my back on finishes with lots of volatile organic compounds, I’ve begun looking for traditional high-quality finishes that won’t shorten my lifespan. [...]

Good nails have been used in fine furniture for centuries. But during the last 100 years, nails have earned a bad reputation among furniture makers. That’s because good nails (cut nails and [...]

This year I have experimented a lot with using a soap finish on chairs and tables. Soap is a traditional Danish finish used on furniture and floors. It’s easy to apply, easy to renew, low on the [...]

After 20 years, I finally wore out my grandfather’s Japanese-made trammel points. They were things of beauty, but the micro-adjustable friction mechanism began to slip and nothing could be done [...]

If you use only hand tools, this isn’t going to interest you much. If you use machines, read carefully. Lubrication makes a huge difference when you work alone. Moving heavy slabs across a [...]

I promise this is not an all-Starrett Christmas. Truth is (I hate to say) the last few things I’ve bought new from Starrett have been disappointing (especially a small pair of dividers). This [...]

When I started seriously into building campaign furniture, I found that I was driving hundreds (no lie) of screws each week when building a typical piece with all the brass hinges, stays, corner [...]

Every woodworker needs an oily rag to wipe down tools after sharpening or use. For years I used a bit of an old sweatshirt until it fell apart. Now I use a microfiber cloth, which holds more oil [...]

Like last year, I am ending this gift guide with a tool that is a little expensive but will change your work to the core. (Last year is was an EasyWood Full-Size Rougher turning tool.) This year [...]

You do not need a complete set of 11 chisels from the 1/8” up to the monster 2”-wide chisel. Sure, the part of you that also collects Hummel figurines really wants a complete set, but most of the [...]