Q & A: Safely Rough-Cut Twisted Lumber Q: I buy my lumber rough, and sometimes I get a very twisted or crooked board. What’s a safe way to crosscut and put a straight edge on these [...]
In Part 2 we modeled the leg, copied and position three more. But the legs extended through the floor and beyond the height of the seat. Today we are going to cut the leg to length, essentially a [...]
I stumbled upon this short film today and I am confident you will enjoy watching it (perhaps with one reservation which I'll explain below). It was created in Canada in 1959 and was titled [...]
Spray Booth for Waterborne Finishes Fifty bucks and a few hours is all it takes to put together this finishing booth. It keeps overspray off my tools and dust off my projects. Since I use [...]
Made to order for a customer who has 2 extra large dogs . This is a double bunk with staircase.This is made from reclaimed timbers and it has been linseed oiled. This i am told will be installed [...]
Retractable Chuck Key After losing three chuck keys I attached the fourth to a plain, old retractable key chain. Now I don't have to turn my shop inside out looking for my chuck key because [...]
Q & A: Board too Wide for Jointer Q: I’ve got some beautiful planks that are too wide for my jointer. I really don’t want to rip them down to size and risk breaking up the grain [...]
Pipe Clamp Protectors Iron pipe clamps can mar a finished surface and leave nasty black stains if they touch a wet glue line. My solution is to raise the pipe above the surface with [...]
Wooden Storm Door Versatile design keeps winter winds out and lets summer breezes in. by Tim Johnson A storm door doesn’t just keep out the wind and rain. It’s the focal point of your home’s [...]
Today we are going to model the legs of the Shaker Stool. Modeling the legs requires close and careful attention to the compound angles and the off axis planes you will be working with. Pay close [...]
As you know there are small businesses popping up every day ,some take a chance to showcase their talent and work .This lady did just that now she hopes to have a thriving business [...]