In Projects

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

A simple fixture lets your table saw cut curves, patterns and tenons in one pass.
By Jim Tolpin
Pages: 84-90

From the February 2004 issue #139
Buy this issue now

My universal fence fixture – the heart of my table saw system to which an entire galaxy of accessories can be attached – greatly expands the utility and ease of use of the table saw. With this system you can easily create a wide variety of joints with speed and precision: from tenons to tongue-in-groove and spline joints, to raised panels and rabbets.

It revolves around a single auxiliary fence that quickly bolts to my table saw’s existing Biesemeyer-style rip fence. Used by itself, this fixture (which is generally left in place as it does not interfere with most table saw operations), guides wide stock on edge through the blade. This fixture also incorporates a “Minitrack” T-slotted aluminum extrusion that accepts the 1/4″ x 20 attachment bolts of two or more shop-made hold-downs to keep stock flat to the table.

From the February 2004 issue #139
Buy this issue now


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts

Start typing and press Enter to search