We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.
MORE OFFCUTS OF TIMBER LYING AROUND IN WORKSHOP.SO HAD A BIT OF TIME TO MAKE THESE ON THE LATHE. MIXTURE OF YEW / MAHOGANY/ AND ASH BLOCKS I FOUND!!. THE PIECE ON THE RIGHT!! TIMBER HAD TO BE CUT INTO 1 1/2 X 1 INCH X 4 INCHES LONG,THEN MITRED ON BENCH SAW TO ANGLES TO MAKE PIECE ROUND.PUT IDEA ON PAPER FIRST SO I GOT ANGLES RIGHT,BEFORE I GLUED IT TO A CIRCULAR PATTERN.THEN TURNED ON THE LATHE ,WITH LID TO MATCH ALSO TURNED ON LATHE. THIS WAS SCREWED TO THE FACE PLATE B4 TURNING.AND WAXED AND POLISHED ALL IN ONE GO..THE PIECE ON THE LEFT WAS A 4 1/ 4 INCH X 4 1/4 INCH X 3 INCH HIGH BLOCK OF YEW.TO TURN THESE I USED THE BASIC TURNING TOOLS.WITH THE THE HELP OF A CARBIDE TIP TURNING TOOL I MADE TO GET THE FINISHING TOUCHES,B4 WAXING.
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
