We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.
SOLID OAK BOARD FOR A CHURCH TO DISPLAY THEIR HYMN NUMBERS ON. THE BOARD WAS LIGHT ENGLISH DRIED OAK. THERE ARE 5 SLOTS FOR RUNNERS ,WHICH HAVE BEEN SPINDLED EACH SIDE 3MM DEEP.SO THE NUMBERS SLIDE IN. THE BOARD IS ONE PIECE 16 INCHES WIDE X 22 INCHES HIGH X 1 INCH THICK . EACH RUNNER IS A T SHAPE. THE T IS 1 INCH ACROSS TOP X 3/4 DOWN. THE NUMBERS ARE 2MM THICK PLASTIC.3X3 INCH SQUARE.THE SLOTS WERE CUT OUT TO SIZE SO THE T FITTED IN WITH WITH 1 MM SLIDE MOVEMENT INCASE IT EVER DID DISSTORT. USED THE RADIAL SAW TO CUT SLOTS. THIS WAS THEN ALL GLUED IN USING BASIC PVA GLUE. ONCE DRIED IT WAS OILED WITH DANISH OIL. THE TOP OF BOARD IS A LITTLE CROSS +. THIS WAS DONE WITH A BALL HEAD ROUTER CUTTER.. PLUS FROM A DISTANCE BEING LIGHT OAK THE NUMBERS STAND OUT… ALL IN A DAYS WORK!!
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
