We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.
THESE ENGINEERING CUTTERS WHICH I HAVE GROUND TO HALF INCH SHAFT TO FIT MY ROUTER. THESES ARE PERFECT WHEN CUTTING SLOT IN HARDWOOD TIMBER. THESE BY FAR I THINK ARE BETTER THAN THE TRADITIONAL ROUTER CUTTERS BY TREND.PLUS THESE WILL LAST A LIFETIME. YOU CAN BUY OR FIND ENGINEERING MACHINE CUTTERS AT ANY CAR BOOT OR INDUSTRIAL ENGINEERING TOOL OUTLET.IF YOU IMAGINE THESE MILL CUTTERS MILL THROUGH STAINLESS STEEL/TITANIUM /MILD STEEL ALUMINIUM/ TUNGSTEN/ AND THEY ARE ONLY SHARPENED ONCE IN A LIFETIME?????? THINK HOW MANY TIMES YOU WOULD SHARPEN THEM ON WOOD? EVEN PALLET WOOD?AS YOU DONT ALWAYS GET EVERY RING NAIL OR STAPLE OUT. USE A TREND CUTTER AND YOUR SURE TO NICK A BIT OF THE CUTTER IF YOU HIT A NAIL OR STAPLE IF YOU HAPPEN TO BE ROUTING SOMETHING THATS BEEN DENALIED?PLUS THESE CUTTERS WILL MILL PLASTIC WHERE YOU WOULDNT USE A TREND CUTTER AS YOU WOULD WORRY THAT IT COST YOU ALOT TO BUY AND YOU MAY DAMAGE IT.THERE ARE DIFFERENT SORTS OF MILL CUTTERS YOU CAN BUY AND DIFFERENT SHAPES AND SIZES. AND WITH A BIT OF KNOWLEDGE AND SKILL YOU CAN GRIND THEM DOWN TO FIT A ROUTER/SPINDLE MOULDER.MORTICER/ AND WITH IDEAS YOU CAN EVEN GRIND THEM TO A PATTERN THEY DO THE SAME JOB AS A TREND ROUTER SET BUT MILL CUTTERS LAST A LIFETIME.AND YOU GET A BETTER FINISH AS ITS GOT 4 FLUTE /4 EDGES UNLIKE THE NORMAL CUTTERS WHICH HAVE 2 EDGES. TRY IT YOU WONT BE DISSAPOINTED?AS ALWAYS WHEN GRINDING OR USING ANY MACHINE ALWAYS WEAR GOGGLES .PEACE OF MIND?
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
