Archives

Now that arthritis has a grip on me, I have trouble getting a good grip on clamp handles. My solution is easy and costs nothing. I carve grooves lengthwise on the handles using a medium-sized [...]

Kitchen Kalamity The cherry salad tongs I’d made needed repairs. They were steam-bent, so they would “spring” when you squeezed them together. But the top portion where the two arms attached was [...]

Tool: Groove Center Buy Now Manufacturer: Prazi MSRP: $149 A lock miter is an excellent joint for building boxes and small cases. It creates lots of surface area for glue and a tight [...]

Floor Sweep Dust Port My router table is probably the most-used tool in my shop. I have dust collector ports on the fence, but when I rout with a bearing-guided bit, it still makes a huge mess. [...]

Tool: Festool MFT/3 Multifunction Table Buy Now Manufacturer: Festool MSRP: $735 If you work in a small space, on a jobsite, or must stow all your tools when you’re done, check out the [...]

My oscillating spindle sander’s auxiliary table makes quick work of edge sanding short boards and forming perfect circles. Make the table from melamine or a laminate-covered material and fasten [...]

I devised a new way to fit a shelf into a dado. I use my router to make a tiny adjustment to the shelf’s thickness instead of fine-tuning my dado set with shims to match the plywood’s thickness. [...]

Pattern-Cut Finials The traditional way to make a square finial on a bandsaw is to mark and cut the pattern on one side of the blank, then tape the offcut back on to the blank in order to guide [...]

Staple Set Pneumatic staplers don’t always set 1/4” crown staples flush.  Driving them the rest of the way with a hammer causes the staples to kink,  so I designed this easy-to-make tool, which I [...]

Being an impatient sort, waiting for glue to reach the bottle’s spout became a pet peeve of mine. To put an end to this, I made a stand with a hole in the top matching the diameter of the [...]

There’s never enough storage space in a shop, is there? When I recycled some old kitchen cabinets to use in my shop, I added one more drawer to each one—in the toe-kick space.

Years ago, I made a corner cupboard from black walnut. I thought the wood was magnificent, but a can of rusty cut nails I used in building it proved to be far more important, taking me on an [...]