In Featured Article

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

Turn your laminate trimmer into a tool that flushes surfaces with incredible finesse.
By Nick Engler
Pages: 34-35

From the April 2004 issue #140
Buy this issue now

Once upon a time I had the brilliant idea to use a strip of hardwood to trim out the edge of a laminate countertop. And not just any laminate, either. This stuff was so expensive that if you asked how much it cost, the salesperson presumed you could not afford it. So scratching it during installation was not an option.

The challenge, I realized the moment the glue set upon the wood trim, was that I had to plane the top surface of the trim flush with the laminate without touching the laminate itself. If the blade touched the laminate, I would remove the thin layer that held the color, revealing the dull substrate (which the manufacturer thoughtfully made a flat white to provide maximum contrast and advertise my slip-up to the world).

From the April 2004 issue #140
Buy this issue now


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts

Start typing and press Enter to search