In Tricks of the Trade

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

Tips for a smooth as silk countersink

The trick is to countersink first, drill the pilot hole second. That may sound backward, but it’s the easiest way to ensure a perfect countersink. I used to drill the pilot hole first on the drill press, but if that hole was relatively large or the wood quite dense, the countersink bit would inevitably chatter and make an ugly, rough surface.

One day I tried the countersink bit first with no pilot hole. What a difference! It made a perfect conical depression. It’s easy to locate the hole because a countersink bit has a sharp tip. Centering the pilot hole is easy, too. A twist bit practically positions itself in the hole’s bottom.


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts

Start typing and press Enter to search